NR 447.03(2)(d) (d) Furnish upon request, and make available at the affected facility during normal business hours for inspection by the department, all records required under this section.

NR 447.03(2)(e) (e) Retain a copy of all monitoring and inspection records for at least 2 years.

NR 447.03(2)(f) (f) Submit quarterly a copy of visible emission monitoring records to the department if visible emissions occurred during the report period. Quarterly reports shall be postmarked by the 30th day following the end of the calendar quarter.

NR 447.03 History History: Cr. Register, October, 1992, No. 442, eff. 11-1-92.

NR 447.04 NR 447.04 Roadways.

NR 447.04(1) (1) Except as provided in sub. (2) no person may construct or maintain a roadway with asbestos tailings or asbestos-containing waste material on that roadway.

NR 447.04(2) (2) A person may use asbestos tailings in the construction or maintenance of a roadway only if any one of the following applies:

NR 447.04(2)(a) (a) It is a temporary roadway on an area of asbestos ore deposits (asbestos mine).

NR 447.04(2)(b) (b) It is a temporary roadway at an active asbestos mill site and is encapsulated with resinous or bituminous binder. The encapsulated road surface shall be maintained at a minimum frequency of once per year to prevent dust emissions.

NR 447.04(2)(c) (c) It is encapsulated in asphalt concrete meeting the specifications contained in section 401 of Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, FP-92, 1992, incorporated by reference in s. NR 484.06 (3), or their equivalent.

NR 447.04 History History: Cr. Register, October, 1992, No. 442, eff. 11-1-92; am. (2) (c), Register, December, 1995, No. 480, eff. 1-1-96.

NR 447.05 NR 447.05 Manufacturing.

NR 447.05(1) (1) Applicability. This section applies to the following manufacturing operations using commercial asbestos:

NR 447.05(1)(a) (a) The manufacture of cloth, cord, wicks, tubing, tape, twine, rope, thread, yarn, roving, lap or other textile materials.

NR 447.05(1)(b) (b) The manufacture of cement products.

NR 447.05(1)(c) (c) The manufacture of fireproofing and insulating materials.

NR 447.05(1)(d) (d) The manufacture of friction products.

NR 447.05(1)(e) (e) The manufacture of paper, millboard and felt.

NR 447.05(1)(f) (f) The manufacture of floor tile.

NR 447.05(1)(g) (g) The manufacture of paints, coatings, caulks, adhesives and sealants.

NR 447.05(1)(h) (h) The manufacture of plastics and rubber materials.

NR 447.05(1)(i) (i) The manufacture of chlorine utilizing asbestos diaphragm technology.

NR 447.05(1)(j) (j) The manufacture of shotgun shell wads.

NR 447.05(1)(k) (k) The manufacture of asphalt concrete.

NR 447.05(2) (2) Standard. Each owner or operator of any of the manufacturing operations to which this section applies shall:

NR 447.05(2)(a) (a) Control emissions by doing either of the following:

NR 447.05(2)(a)1. 1. Discharge no visible emissions to the outside air from these operations or from any building or structure in which they are conducted or from any other fugitive sources; or

NR 447.05(2)(a)2. 2. Use the methods specified by s. NR 447.15 to clean emissions from these operations containing particulate asbestos material before they escape to, or are vented to, the outside air.

NR 447.05(2)(b) (b) Monitor each potential source of asbestos emissions from any part of the manufacturing facility, including air cleaning devices, process equipment and buildings housing material processing and handling equipment, at least once each day during daylight hours for visible emissions to the outside air during periods of operation. The monitoring shall be by visual observation of at least 15 seconds duration per source of emissions.