NR 670.235(1)(b)(b) The owner or operator of an incinerator, cement kiln or lightweight aggregate kiln that has conducted a comprehensive performance test and submitted to the department a notification of compliance documenting compliance with the standards of 40 CFR part 63, subpart EEE may request in the application to reissue the license for the combustion unit that the owner or operator control emissions from startup, shutdown and malfunction events under any of the following options: 2) Specify that these license requirements apply only when the facility is operating under its startup, shutdown, and malfunction plan.
1) Include, in the license, conditions that ensure emissions of toxic compounds are minimized from startup, shutdown and malfunction events, including releases from emergency safety vents, based on review of information including the source’s startup, shutdown and malfunction plan, design and operating history.
2) Specify that these license requirements apply only when the facility is operating under its startup, shutdown and malfunction plan.
NR 670.235(1)(b)2.b.b. 1) The owner or operator shall notify the department in writing of changes to the startup, shutdown and malfunction plan or changes to the design of the source that may significantly increase emissions of toxic compounds from startup, shutdown or malfunction events, including releases from emergency safety vents. The owner or operator shall notify the department of the changes within 5 days of making the changes. The owner or operator shall identify in the notification recommended revisions to license conditions necessary as a result of the changes to ensure that emissions of toxic compounds are minimized during these events. 2) The department may revise license conditions as a result of these changes to ensure that emissions of toxic compounds are minimized during startup, shutdown or malfunction events, including releases from emergency safety vents either:
a) Upon license renewal, or, if warranted,
NR 670.235(2)(a)(a) Interim license operations. In compliance with ss. NR 665.0340 and 666.100 (2), the owner or operator of an incinerator, cement kiln, lightweight aggregate kiln, solid fuel boiler, liquid fuel boiler, or hydrochloric acid production furnace that is operating under the interim license standards of ch. NR 665 or 666 may control emissions of toxic compounds during startup, shutdown and malfunction events under any of the following options after conducting a comprehensive performance test and submitting to the department a notification of compliance documenting compliance with the standards of 40 CFR part 63, subpart EEE: NR 670.235(2)(a)1.1. ‘RCRA option.’ Under this option, the owner or operator continues to comply with the interim license emission standards and operating requirements of ch. NR 665 or 666 relevant to control of emissions from startup, shutdown and malfunction events. Those standards and requirements apply only during startup, shutdown and malfunction events. NR 670.235(2)(a)2.2. ‘CAA option.’ Under this option, the owner or operator is exempt from the interim license standards of ch. NR 665 or 666 relevant to control of emissions of toxic compounds during startup, shutdown and malfunction events upon submission of written notification and documentation to the department that the startup, shutdown and malfunction plan required under 40 CFR 63.1206 (c) (2) has been approved by the department under 40 CFR 63.1206 (c) (2) (ii) (B). NR 670.235(2)(b)(b) Operations under a subsequent operating license. When an owner or operator of an incinerator, cement kiln or lightweight aggregate kiln that is operating under the interim license standards of ch. NR 665 or 666 submits an operating license application, the owner or operator may request that the department control emissions from startup, shutdown and malfunction events under any of the options provided by sub. (1) (b) 1., 2. or 3. NR 670.235(3)(3) New units. Hazardous waste incinerator, cement kiln, lightweight aggregate kiln, solid fuel boiler, liquid fuel boiler or hydrochloric acid production furnace units that become subject to hazardous waste licensing requirements after October 12, 2005 shall control emissions of toxic compounds during startup, shutdown, and malfunction events under either of the following options: NR 670.235(3)(b)(b) Request to include in the hazardous waste license, conditions that ensure emissions of toxic compounds are minimized from startup, shutdown and malfunction events, including releases from emergency safety vents, based on review of information including the source’s startup, shutdown and malfunction plan and design. The department will specify that these license conditions apply only when the facility is operating under its startup, shutdown, and malfunction plan. NR 670.235 HistoryHistory: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 16-007: am. (title), (1) (a) (intro.), (2) (a) (intro.), cr. (3) Register July 2017 No. 739, eff. 8-1-17. NR 670.250NR 670.250 What is a standardized license? The standardized license is a special form of license that may consist of 2 parts: a uniform portion that the department issues in all cases and a supplemental portion that the department issues at its discretion. The term “standardized license” is defined in s. NR 670.002 (23m).