NR 422.142(2)(b)2.2. ‘Non-heatset web presses.’ Any person who owns or operates a non-heatset web lithographic printing press shall, when printing on a substrate other than metal, metal-foil or plastic, use a fountain solution which has a VOC content as applied of no more than 5.0% by weight and which contains no restricted alcohol. NR 422.142(2)(b)3.3. ‘Sheet-fed presses.’ Any person who owns or operates a sheet-fed lithographic printing press shall, when printing on a substrate other than metal, metal-foil or plastic, use a fountain solution which has a VOC content as applied of no more than one of the following: NR 422.142(2)(b)4.4. ‘Metal, metal-foil or plastic substrates.’ Any person who owns or operates any lithographic printing press shall, when printing on a metal, metal-foil or plastic substrate, use a fountain solution which has a VOC content as applied of no more than one of the following: NR 422.142(2)(b)4.a.a. 13.5% by weight if the fountain solution contains any restricted alcohol and is refrigerated to 60°F or less. NR 422.142(2)(c)1.1. Except as provided in subd. 2., any person who owns or operates any lithographic printing press shall use a cleaning solution which, as applied, has any of the following: NR 422.142(2)(c)1.b.b. A VOC composite partial vapor pressure of less than or equal to 10 mm of Hg at 20°C (68°F). NR 422.142(2)(c)2.2. The owner or operator of a facility may use a cleaning solution that does not meet the emission limitations of subd. 1., provided the amount used at the facility under this subdivision over any 12 consecutive months does not exceed any of the following: NR 422.142(3)(a)(a) The owner or operator of any lithographic printing press shall monitor at least once each 8-hour shift the temperature of each fountain solution reservoir for any fountain solution subject to sub. (2) (b) 1. b., 3. b., or 4. a. NR 422.142(3)(b)(b) The owner or operator of any lithographic printing press subject to the VOC control device requirements of sub. (2) (a) shall comply with the monitoring requirements in s. NR 422.143 (5) (b). NR 422.142(4)(4) Recordkeeping requirements. In addition to the applicable recordkeeping requirements in s. NR 439.04, the owner or operator of any lithographic printing press shall collect and record the applicable information specified in this subsection. The information shall be maintained at the facility for a minimum of 5 years and shall be made available to an authorized department representative at any time during normal working hours. The information required is all of the following: NR 422.142(4)(a)(a) For a heatset web lithographic printing press using a control device, all of the following: NR 422.142(4)(a)1.1. Temperature monitoring data for the control device in accordance with sub. (3) (b) for each day of operation. NR 422.142(4)(a)2.2. A log or record of any time when the control device or control device monitoring equipment is offline while the associated printing line is in operation. NR 422.142(4)(a)3.3. A maintenance log for the control device and monitoring equipment detailing all maintenance performed and including dates and duration of any outages. NR 422.142(4)(b)(b) For fountain solutions monitored under sub. (3), the fountain solution reservoir temperature for each 8-hour shift of operation. NR 422.142(4)(c)(c) For each fountain solution used, the percent by weight VOC content as applied, and the chemical name of each restricted alcohol. NR 422.142(4)(d)(d) For each cleaning solution prepared, the percent by weight VOC content or the VOC composite partial vapor pressure as applied. NR 422.142(4)(e)(e) For each month of operation, the volume of all cleaning solutions used that do not meet the emission limitations of sub. (2) (c) 1., as allowed under sub. (2) (c) 2.