NR 440.77(1)(c)14.f. f. Units burning only hydrocarbon liquids or solids to produce hydrogen, carbon monoxide, synthesis gas or other gases for use in other manufacturing processes.

NR 440.77(1)(c)14.g. g. Units burning only photographic film to recover silver.

NR 440.77(1)(c)15. 15. ‘Laboratory analysis units.’ Units that burn samples of materials for the purpose of chemical or physical analysis.

NR 440.77(1)(d) (d) What if my chemical recovery unit is not listed in par. (c) 14.?

NR 440.77(1)(d)1. 1. If your chemical recovery unit is not listed in par. (c) 14., you can petition the administrator to add your unit to the list as provided in 40 CFR 60.2025.

NR 440.77(1)(d)2. 2. Until the administrator approves your petition, the incineration unit is covered by this section.

NR 440.77(1)(d)3. 3. If a petition is approved, the administrator will amend 40 CFR 60.2020 (n) to add the unit to the list of chemical recovery units and the department will add the unit to par. (c) 14.

NR 440.77(1)(f) (f) How are these new source performance standards structured? The new source performance standards in this section contain the following 11 major components:

NR 440.77(1)(f)1. 1. Definitions.

NR 440.77(1)(f)2. 2. Preconstruction siting analysis.

NR 440.77(1)(f)3. 3. Waste management plan.

NR 440.77(1)(f)4. 4. Operator training and qualification.

NR 440.77(1)(f)5. 5. Emission limitations and operating limits.

NR 440.77(1)(f)6. 6. Performance testing.

NR 440.77(1)(f)7. 7. Initial compliance requirements.

NR 440.77(1)(f)8. 8. Continuous compliance requirements.

NR 440.77(1)(f)9. 9. Monitoring.

NR 440.77(1)(f)10. 10. Recordkeeping and reporting.

NR 440.77(1)(f)11. 11. Tables.

NR 440.77(1)(g) (g) Do all 11 components of these new source performance standards apply at the same time? No. You shall meet the preconstruction siting analysis and waste management plan requirements before you commence construction of the CISWI unit. The operator training and qualification, emission limitations, operating limits, performance testing and compliance, monitoring and most recordkeeping and reporting requirements are met after the CISWI unit begins operation.

NR 440.77(2) (2) Definitions. As used in this section, all terms not defined in this subsection have the meanings given in s. NR 440.02 or, for terms not defined in s. NR 440.02, the meanings given in s. NR 400.02. In this section:

NR 440.77(2)(a) (a) “Agricultural waste” means vegetative agricultural materials such as nut and grain hulls and chaff (e.g., almond, walnut, peanut, rice and wheat), bagasse, orchard prunings, corn stalks, coffee bean hulls and grounds, and other vegetative waste materials generated as a result of agricultural operations.

NR 440.77(2)(b) (b) “Air curtain incinerator” means an incinerator that operates by forcefully projecting a curtain of air across an open chamber or pit in which combustion occurs. Incinerators of this type can be constructed above or below ground and with or without refractory walls and floor.

NR 440.77 Note Note: Air curtain incinerators are not to be confused with conventional combustion devices with enclosed fireboxes and controlled air technology such as mass burn, modular and fluidized bed combustors.

NR 440.77(2)(c) (c) “Auxiliary fuel” means natural gas, liquified petroleum gas, fuel oil or diesel fuel.

NR 440.77(2)(cm) (cm) “Bag leak detection system” means an instrument that is capable of monitoring particulate matter loadings in the exhaust of a fabric filter (that is, baghouse) in order to detect bag failures. A bag leak detection system includes an instrument that operates on triboelectric, light scattering, light transmittance or other principle to monitor relative particulate matter loadings.

NR 440.77(2)(d) (d) “Calendar quarter” means 3 consecutive months, nonoverlapping, beginning on: January 1, April 1, July 1 or October 1.

NR 440.77(2)(e) (e) “Chemotherapeutic waste” means waste material resulting from the production or use of antineoplastic agents used for the purpose of stopping or reversing the growth of malignant cells.

NR 440.77(2)(f) (f) “Clean lumber” means wood or wood products that have been cut or shaped and include wet, air-dried and kiln-dried wood products. Clean lumber does not include wood products that have been painted, pigment-stained or pressure-treated by compounds such as chromate copper arsenate, pentachlorophenol and creosote.