DHS 163.20(8)(a)1.zj.zj. Describe dust clearance inspections and how they differ from cleaning verification. DHS 163.20(8)(a)1.zo.zo. List the records that must be kept on the job site during a renovation activity. DHS 163.20(8)(a)1.zr.zr. Describe the records that must be generated and maintained if using a paint test kit. DHS 163.20(8)(a)1.zu.zu. List and discuss the use of the 7 steps to lead-safe renovation, repair and painting for training uncertified workers. DHS 163.20(8)(a)2.2. ‘Lead abatement work course.’ A lead abatement work course shall provide a minimum of 8 training hours only to persons who successfully completed a department-approved lead-safe renovation course and meet the requirements of s. DHS 163.10 for certification. The course shall include lectures, demonstrations, a minimum of 6 hours of hands-on practice and hands-on skills assessment, a course review and a written course test. The course shall provide instruction and materials that address all of the following student learning goals and objectives: DHS 163.20(8)(a)2.c.c. Discuss employer responsibilities for worker training and protection under 29 CFR 1926.62, lead in construction regulations issued by the U.S. occupational safety and health administration. DHS 163.20(8)(a)2.d.d. Determine characteristics of a job site that can affect an abatement project. DHS 163.20(8)(a)2.f.f. Discuss general engineering controls used for reducing and containing dust-lead during abatement activities that generate large quantities of dust. DHS 163.20(8)(a)2.i.i. Demonstrate the removal of paint from components using machine sanding, grinding, or planing with HEPA-vacuum exhaust control attachments, and using wet sanding and wet scraping according to documented methodologies. DHS 163.20(8)(a)2.j.j. Discuss the structural conditions required for successful use of encapsulants. DHS 163.20(8)(a)2.m.m. Demonstrate the use of documented methodologies to remove and replace windows.