ATCP 50.46(3)(c)(c) Certifications issued under this section are for a term of three years and automatically renew unless any of the following occur:

ATCP 50.46(3)(c)1.1. The practitioner is not employed by an entity with a supervisor who is authorized to sign the certification.

ATCP 50.46(3)(c)3.3. The practitioner has failed to provide or update information required for certification under par. (b).

ATCP 50.46(3)(c)4.4. The practitioner has rescinded the signature on the certification or otherwise indicates an intent to surrender the certification.

ATCP 50.46(4)(a)(a) To evaluate an applicant under sub. (3), the department’s field engineer shall complete a department certification form. The field engineer shall rate the applicant under sub. (5) based on the applicant’s demonstrated knowledge, training, experience, and record of appropriately seeking assistance. Evaluations shall be fair and consistent.

ATCP 50.46(4)(b)(b) To evaluate an applicant, the department’s field engineer may conduct interviews, perform inspections, and require answers and documentation from the applicant. The field engineer may ask engineering staff from NRCS to help evaluate an applicant.

ATCP 50.46(5)(a)(a) For each type of agricultural or other conservation engineering practice identified in the required certification form, the department’s field engineer shall identify the most complex of the 5 job classes in the practice for which the applicant is authorized to do each of the following:

ATCP 50.46(5)(a)1.1. Conduct planning activities, including site inventory and evaluation functions to define alternative engineering solutions.

ATCP 50.46(5)(a)2.2. Certify that design specifications for jobs in that class comply with those identified in subch. VIII, authorized by the department under s. ATCP 50.40 (3), allowed by s. 281.65, Stats., or approved and published, as part of the NRCS field office technical guide or as a formal technical standard by the DNR.

ATCP 50.46(5)(a)3.3. Certify that jobs in that class have been installed according to the approved design, and according to any applicable standards and specifications.

ATCP 50.46(5)(c)(c) In cases where department field engineers may be required to provide a job certification approval level at a level higher than their own, they should consult with a person who has appropriate certification levels in the areas being rated. A person who is certified at a job level under par. (a) may certify their own work at that level for any purpose including funding authorized under this chapter.

ATCP 50.46(6)(a)(a) The department’s field engineer shall act on a certification application under sub. (3) within 30 days after the field engineer receives that application, provided that the applicant promptly submits relevant information and documentation requested by the field engineer.

ATCP 50.46 NoteNote: When recertifying an applicant who was previously certified by the department or NRCS, the department’s field engineer may raise one or more rating levels, lower one or more rating levels, or reaffirm one or more rating levels.

ATCP 50.46(6)(b)(b) Whenever the department’s field engineer certifies a conservation engineering practitioner, the field engineer shall issue a written certification on the department’s certification form. The certification becomes effective when signed by all of the following:

ATCP 50.46(6)(c)(c) Whenever the department’s field engineer denies a request under sub. (3) for a specific certification rating, the field engineer shall issue the denial in writing and shall specify the reasons for the denial.

ATCP 50.46(6)(d)(d) The department’s field engineer shall retain a copy of each certification under par. (b), each denial under par. (c), and any other documentation received or compiled in connection with an application under sub. (3).

ATCP 50.46(7)(a)(a) A department field engineer shall review each certification rating under sub. (5) at least once every 3 years, and may review a rating at any time. A field engineer shall review a rating whenever a certified conservation engineering practitioner requests that review.

ATCP 50.46(7)(b)(b) Based on a review under par. (a), a department field engineer shall issue a new certification rating which reaffirms or modifies the prior rating under sub. (5). The field engineer shall provide a copy of each new rating to the person rated. The field engineer may not reduce a rating except for good cause.

ATCP 50.46(7)(c)(c) A field engineer shall document, in writing, the field engineer’s reasons for reducing a certification rating under sub. (5), or for refusing to make a requested rating change. The field engineer shall provide that documentation to the person rated, and to that person’s supervisor if any.