NR 465.27(2)(e)2.e.e. To the extent that waste manifests include this information, they may be used as part of the documentation of the amount of waste materials and mass of organic HAP contained in them. NR 465.27(2)(f)(f) Determine the total volume of coating solids used, liters, which is the combined volume of coating solids for all of the coatings used during the compliance period, using the following equation: (Equation 2)
where:
Vst is the total volume of coating solids used during the compliance period, liters
Volc,i is the total volume of coating, i, used during the compliance period, liters
Vs,i is the volume fraction of coating solids for coating, i, liters solids per liter coating, determined according to s. NR 465.26 (2) (b) m is the number of coatings used during the compliance period
NR 465.27(2)(g)(g) Calculate the organic HAP emission rate, kg organic HAP per liter coating solids used, using the following equation: (Equation 3)
where:
Havg is the organic HAP emission rate for the compliance period, kg organic HAP per liter coating solids
He is the total mass organic HAP emissions from all materials used during the compliance period, kg, as calculated using Equation 1 in par. (e) 1.
Vst is the total volume coating solids used during the compliance period, liters, as calculated using Equation 2 in par. (f)
NR 465.27(2)(h)(h) Ensure that the organic HAP emission rate for the initial compliance period is less than or equal to the applicable emission limit in s. NR 465.23 (1). You shall keep all records as required by s. NR 465.25 (3) and (4). As part of the notification of compliance status required by s. NR 465.25 (1), you shall identify the coating operation or operations for which you used the emission rate without add-on controls option and submit a statement that the coating operation was, or operations were, in compliance with the emission limitations during the initial compliance period because the organic HAP emission rate was less than or equal to the applicable emission limit in s. NR 465.23 (1). NR 465.27(3)(3) How do I demonstrate continuous compliance with the emission limitations?. NR 465.27(3)(a)(a) To demonstrate continuous compliance, the organic HAP emission rate for each compliance period, determined according to sub. (2) (a) to (g), shall be less than or equal to the applicable emission limit in s. NR 465.23 (1). Each month following the initial compliance period described in sub. (1) is a compliance period. NR 465.27(3)(b)(b) If the organic HAP emission rate for any compliance period exceeded the applicable emission limit in s. NR 465.23 (1), this is a deviation from the emission limitations for that compliance period and shall be reported as specified in s. NR 465.25 (1) (b) 6. and (2) (e). NR 465.27(3)(c)(c) As part of each semiannual compliance report required by s. NR 465.25 (2), you shall submit a statement that you were in compliance with the emission limitations during the reporting period because the organic HAP emission rate for each compliance period was less than or equal to the applicable emission limit in s. NR 465.23 (1). NR 465.27 HistoryHistory: CR 03-037: cr. Register March 2004 No. 579, eff. 4-1-04. NR 465.28NR 465.28 Compliance requirements for the emission rate with add-on controls option. NR 465.28(1)(1) By what date must I conduct performance tests and other initial compliance demonstrations?. NR 465.28(1)(a)(a) Existing affected sources. For an existing affected source, you shall do all of the following: NR 465.28(1)(a)1.1. Install and operate all emission capture systems, add-on control devices, and CPMS you use to demonstrate compliance no later than the applicable compliance date specified in s. NR 465.21 (4). Except for solvent recovery systems for which you conduct liquid-liquid material balances according to sub. (2) (g), you shall conduct a performance test of each capture system and add-on control device according to the procedures in subs. (5) to (7), and establish the operating limits required by s. NR 465.23 (3) no later than the compliance date specified in s. NR 465.21 (4). For a solvent recovery system for which you conduct liquid-liquid material balances according to sub. (2) (g), you shall initiate the first material balance no later than the compliance date specified in s. NR 465.21 (4).