NR 670.021(2)(c)(c) Control of run-off.
NR 670.021(2)(d)(d) Management of collection and holding facilities associated with run-on and run-off control systems.
NR 670.021(2)(e)(e) Control of wind dispersal of particulate matter, where applicable.
NR 670.021(3)(3)A description of how each landfill, including the double liner system, leachate collection and removal system, leak detection system, cover system and appurtenances for control of run-on and run-off, will be inspected in order to meet s. NR 664.0303 (1), (2) and (3). This information shall be included in the inspection plan submitted under s. NR 670.014 (2) (e).
NR 670.021(4)(4)A description of how each landfill, including the liner and cover systems, will be inspected in order to meet s. NR 664.0303 (1) and (2). This information shall be included in the inspection plan submitted under s. NR 670.014 (2) (e).
NR 670.021(5)(5)Detailed plans and an engineering report describing the final cover which will be applied to each landfill or landfill cell at closure according to s. NR 664.0310 (1), and a description of how each landfill will be maintained and monitored after closure according to s. NR 664.0310 (2). This information shall be included in the closure and long-term care plans submitted under s. NR 670.014 (2) (m).
NR 670.021(6)(6)If ignitable or reactive wastes will be landfilled, an explanation of how the standards of s. NR 664.0312 will be complied with.
NR 670.021(7)(7)If incompatible wastes, or incompatible wastes and materials will be landfilled, an explanation of how s. NR 664.0313 will be complied with.
NR 670.021(8)(8)If bulk or non-containerized liquid waste or wastes containing free liquids is to be landfilled prior to May 8, 1985, an explanation of how s. NR 664.0314 (1) will be complied with.
NR 670.021(9)(9)If containers of hazardous waste are to be landfilled, an explanation of how s. NR 664.0315 or 664.0316, as applicable, will be complied with.
NR 670.021(10)(10)A waste management plan for hazardous waste numbers F020, F021, F022, F023, F026 and F027 describing how a landfill is or will be designed, constructed, operated and maintained to meet s. NR 664.0317. This submission shall address all of the following items specified in s. NR 664.0317:
NR 670.021(10)(a)(a) The volume, physical and chemical characteristics of the wastes, including their potential to migrate through soil or to volatilize or escape into the atmosphere.
NR 670.021(10)(b)(b) The attenuative properties of underlying and surrounding soils or other materials.
NR 670.021(10)(c)(c) The mobilizing properties of other materials co-disposed with these wastes.
NR 670.021(10)(d)(d) The effectiveness of additional treatment, design or monitoring techniques.
NR 670.021 HistoryHistory: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 670.022NR 670.022Specific feasibility and plan of operation report information requirements for boilers and industrial furnaces burning hazardous waste. When an owner or operator of a cement kiln, lightweight aggregate kiln, solid fuel boiler, liquid fuel boiler or hydrochloric acid production furnace becomes subject to hazardous waste licensing requirements after October 12, 2005, or when an owner or operator of an existing cement, lightweight aggregate kiln, solid fuel boiler, liquid fuel boiler or hydrochloric acid production furnace demonstrates compliance with the air emission standards and limitations in 40 CFR part 63, subpart EEE (for instance, by conducting a comprehensive performance test and submitting a notification of compliance under 40 CFR 63.1207(j) and 63.1210(d) documenting compliance with 40 CFR part 63, subpart EEE), the requirements of this section do not apply. The requirements of this section do apply, however, if the department determines certain provisions are necessary to ensure compliance with ss. NR 666.102 (5) (a) and (b) 3. if the owner or operator elects to comply with s. NR 670.235 (1) (a) 1. to minimize emissions of toxic compounds from startup, shutdown and malfunction events; or if the facility is an area source and the owner or operator elects to comply with the ss. NR 666.105, 666.106, and 666.107 standards and associated requirements for particulate matter, hydrogen chloride and chlorine gas and non-mercury metals; or the department determines certain provisions apply, on a case-by-case basis, for purposes of information collection according to ss. NR 670.010 (11) and (12) and 670.032 (2) (b) and (c).
NR 670.022(1)(1)Trial burns.
NR 670.022(1)(a)(a) General. Except as provided below, owners and operators that are subject to the standards to control organic emissions provided by s. NR 666.104, standards to control particulate matter provided by s. NR 666.105, standards to control metals emissions provided by s. NR 666.106, or standards to control hydrogen chloride or chlorine gas emissions provided by s. NR 666.107 shall conduct a trial burn to demonstrate conformance with those standards and shall submit a trial burn plan or the results of a trial burn, including all required determinations, according to s. NR 670.066.
NR 670.022(1)(a)1.1. A trial burn to demonstrate conformance with a particular emission standard may be waived under ss. NR 666.104 to 666.107 and pars. (b) to (e).
NR 670.022(1)(a)2.2. The owner or operator may submit data in lieu of a trial burn, as prescribed in par. (f).
NR 670.022(1)(b)(b) Waiver of trial burn for DRE.
NR 670.022(1)(b)1.1. ‘Boilers operated under special operating requirements.’ When seeking to be licensed under ss. NR 666.104 (1) (d) and 666.110 that automatically waive the DRE trial burn, the owner or operator of a boiler shall submit documentation that the boiler operates under the special operating requirements provided by s. NR 666.110.
NR 670.022(1)(b)2.2. ‘Boilers and industrial furnaces burning low risk waste.’ When seeking to be licensed under the provisions for low risk waste provided by ss. NR 666.104 (1) (e) and s. NR 666.109 (1) that waive the DRE trial burn, the owner or operator shall submit all of the following:
NR 670.022(1)(b)2.a.a. Documentation that the device is operated in conformance with s. NR 666.109 (1) (a).
NR 670.022(1)(b)2.b.b. Results of analyses of each waste to be burned, documenting the concentrations of nonmetal compounds listed in ch. NR 661 Appendix VIII, except for those constituents that would reasonably not be expected to be in the waste. Identify the constituents excluded from analysis and explain the basis for their exclusion. The analysis shall rely on appropriate analytical techniques.
NR 670.022(1)(b)2.c.c. Documentation of hazardous waste firing rates and calculations of reasonable, worst-case emission rates of each constituent identified in subd. 2. b. using procedures provided by s. NR 666.109 (1) (b) 2.
NR 670.022(1)(b)2.d.d. Results of emissions dispersion modeling for emissions identified in subd. 2. c. using modeling procedures prescribed by s. NR 666.106 (8). The department will review the emission modeling conducted by the applicant to determine conformance with these procedures. The department will either approve the modeling or determine that alternate or supplementary modeling is appropriate.
NR 670.022(1)(b)2.e.e. Documentation that the maximum annual average ground level concentration of each constituent identified in subd. 2. b. quantified in conformance with subd. 2. d. does not exceed the allowable ambient level established in ch. NR 666 Appendix IV or V. The acceptable ambient concentration for emitted constituents for which a specific reference air concentration has not been established in ch. NR 666 Appendix IV or risk specific dose has not been established in ch. NR 666 Appendix V is 0.1 micrograms per cubic meter, as noted in the footnote to ch. NR 666 Appendix IV.