NR 419.08(3)(a)(a) Final compliance with the requirements of sub. (2) shall be achieved by May 31, 1995 or upon startup, whichever is later. NR 419.08(3)(b)(b) The owner or operator shall submit certification to the department, by July 1, 1995 or within 90 days after startup, whichever is later, that the facility is in compliance with the requirements of sub. (2), as demonstrated by the applicable testing methods of s. NR 439.06 (3). NR 419.08(4)(4) Emission testing. The owner or operator of a facility which employs a urethane cold box binder shall demonstrate compliance with the emission rate in sub. (2) (c) using one of the test methods in s. NR 439.06 (3) (a) prior to the final compliance date in sub. (3) (a), and at least every 2 years thereafter within 60 days of the anniversary of the initial compliance test. NR 419.08(5)(5) Emission control system monitoring. The owner or operator of any facility which uses a wet scrubber to control organic gas emissions from the catalysis of urethane cold box binders shall continuously measure and record the pH of the scrubber liquid in addition to meeting the monitoring requirements of s. NR 439.055 (1) (e). NR 419.08(6)(6) Recordkeeping. Owners or operators of a facility subject to this section, including those exempt from the requirements of sub. (2) under sub. (1) (b), shall maintain the following records in accordance with s. NR 439.04 (1) to (3): NR 419.08(6)(a)(a) The quantity, in pounds, of each type of core binder used on an annual basis. NR 419.08(6)(c)(c) The total quantity, in pounds, of organic gas used to catalyze the formation of urethane cold box binders on an annual basis. NR 419.08(6)(d)(d) The as purchased density and percent VOC, by weight, of each core or mold coating used at the facility. NR 419.08(6)(e)(e) The total quantity, in pounds or gallons, of each core or mold coating used on a monthly basis. NR 419.08(6)(f)(f) The total quantity of solvent, in pounds, added to each core or mold coating on a monthly basis. NR 419.08 HistoryHistory: Cr. Register, June, 1994, No. 462, eff. 7-1-94; am. (1) (c), (2) (intro.), (b), (c), (3), (5) and (6) (intro.) and r. (7), Register, October, 1999, No. 526, eff. 11-1-99.