NR 660.11(1) (1) This section is adopted under ss. 227.21 (2) (b) and 291.05, Stats., to incorporate by reference testing, monitoring, and other technical standards, established by the federal government and technical societies and organizations, to which reference is made in chs. NR 660 to 670. Some materials that are incorporated by reference in other references are hereby incorporated by reference and made a part of this subsection.

NR 660.11 Note Note: Copies of these materials are available for inspection in the offices of the Department of Natural Resources, Madison, Wisconsin, the Legislative Reference Bureau, or may be obtained for personal use at the addresses noted.

NR 660.11(2) (2) The following materials are available for purchase from the American Society for Testing and Materials, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428–2959:

NR 660.11(2)(a) (a) ASTM D–93–79 or D–93–80, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, incorporated by reference for s. NR 661.0021.

NR 660.11(2)(b) (b) ASTM D–1946–82, Standard Method for Analysis of Reformed Gas by Gas Chromatography, incorporated by reference for ss. NR 664.1033 and 665.1033.

NR 660.11(2)(c) (c) ASTM D 2267–88, Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography, incorporated by reference for s. NR 664.1063.

NR 660.11 Note Note: Withdrawn standard, 1992.

NR 660.11(2)(d) (d) ASTM D 2382–83, Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method), incorporated by reference for ss. NR 664.1033 and 665.1033.

NR 660.11(2)(e) (e) ASTM D 2879–92, Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope, incorporated by reference for s. NR 665.1084.

NR 660.11(2)(f) (f) ASTM D–3278–78, Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester, incorporated by reference for s. NR 661.0021 (1).

NR 660.11(2)(g) (g) ASTM E 168–88, Standard Practices for General Techniques of Infrared Quantitative Analysis, incorporated by reference for s. NR 664.1063.

NR 660.11(2)(h) (h) ASTM E 169–87, Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis, incorporated by reference for s. NR 664.1063.

NR 660.11(2)(i) (i) ASTM E 260–85, Standard Practice for Packed Column Gas Chromatography, incorporated by reference for s. NR 664.1063.

NR 660.11(2)(j) (j) ASTM E 926–88, Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals, Test Method C—Bomb, Acid Digestion Method.

NR 660.11(2)(k) (k) ASTM D140-70, Standard Practice for Sampling Bituminous Materials, incorporated by reference for ch. NR 661 Appendix I.

NR 660.11(2)(L) (L) ASTM D346-75, Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis, incorporated by reference for ch. NR 661 Appendix I.

NR 660.11(2)(m) (m) ASTM D420-69, Guide to Site Characterization for Engineering, Design, and Construction Purposes, incorporated by reference for ch. NR 661 Appendix I.

NR 660.11(2)(n) (n) ASTM D1452-65, Standard Practice for Soil Investigation and Sampling by Auger Borings, incorporated by reference for ch. NR 661 Appendix I.

NR 660.11(2)(o) (o) ASTM D2234-76, Standard Practice for Collection of a Gross Sample of Coal, incorporated by reference for ch. NR 661 Appendix I.

NR 660.11(2)(p) (p) ASTM D2879-86, Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope, incorporated by reference for ch. NR 664 and subch. BB of ch. NR 665.

NR 660.11(2)(q) (q) ASTM G21-70 (1984a), Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi, incorporated by reference for ch. NR 664 and subch. N of ch. NR 665.

NR 660.11(2)(r) (r) ASTM G22-76 (1984b), Standard Practice for Determining Resistance of Plastics to Bacteria, incorporated by reference for ch. NR 664 and subch. N of ch. NR 665.

NR 660.11(3) (3) The following materials are available for purchase from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; or for purchase from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, (202) 512–1800:

NR 660.11(3)(a) (a) APTI Course 415: Control of Gaseous Emissions, EPA Publication EPA–450/2–81– 005, December 1981, incorporated by reference for ss. NR 664.1035, 665.1035, 670.024, and 670.025.

NR 660.11(3)(b) (b) The following methods as published in the test methods compendium known as “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW–846, Third Edition:

NR 660.11 Note Note: A suffix of “A” in the method number indicates revision one (the method has been revised once). A suffix of “B” in the method number indicates revision two (the method has been revised twice). A suffix of “C” in the method number indicates revision three (the method has been revised three times). A suffix of “D” in the method number indicates revision four (the method has been revised four times).

NR 660.11(3)(b)1. 1. Method 1311, September 1992, and Update I, incorporated by reference for ss. NR 661.0024, 668.07, and 668.40.

NR 660.11(3)(b)2. 2. Method 0011, December 1996, and Update III, incorporated by reference for ch. NR 666 Appendix IX.

NR 660.11(3)(b)3. 3. Method 0023A, December 1996, and Update III, incorporated by reference for s. NR 666.104 and ch. NR 666 Appendix IX.