NR 422.02(87m)(87m) “Single-stage coating” means a topcoat consisting of only one coating. NR 422.02(87s)(87s) “Soft coating” means any coating that provides a soft tactile feel and appearance similar to surfaces such as leather when applied to plastic parts. NR 422.02(87v)(87v) “Solar-absorbent coating” means a coating which has as its prime purpose the absorption of solar radiation. NR 422.02(87x)(87x) “Solid-film lubricant” means a very thin coating consisting of a binder system containing as its chief pigment material one or more of molybdenum disulfide, graphite, polytetrafluoroethylene (PTFE) or other solids that act as a dry lubricant between faying surfaces. NR 422.02(88)(88) “Special purpose screen printing inks and coatings” means inks and coatings used in screen printing which are conductive inks, are used to print ink transfers, or are designed to resist or withstand any of the following: NR 422.02(88)(b)(b) Exposure to chemicals, solvents, acids, detergents, oil products or cosmetics. NR 422.02(89)(89) “Specialty coating” means one of the following: NR 422.02(89)(a)(a) For the purpose of automobile refinishing operations, coatings used only for discrete portions of the vehicle, such as bumpers or spot repairs, which are necessary due to unusual coating performance requirements. Specialty coatings include adhesion promoters, uniform finish blenders, elastomeric coatings, gloss flatteners, bright metal trim repair, jambing (cut-in) clear coats, impact resistant coatings, underbody coatings, weld-through primers and anti-glare safety coatings. NR 422.02(89)(b)(b) For the purpose of plastic parts coating under s. NR 422.083, coatings used for unusual job performance requirements. These products include adhesion primers, soft coatings, reflective argent coatings, electrostatic prep coatings, headlamp lens coatings, pad printing coatings, stencil coatings, vacuum metallizing coatings, anti-glare safety coatings, resist coatings and sensitizer coatings. NR 422.02(90)(90) “Stain” means, for the purpose of wood furniture coating, any color coat having a solids content of no more than 8.0%, by weight. NR 422.02(90m)(90m) “Stencil coating” means an ink or coating that is applied onto or over a stencil at a thickness of one mil or less of ink or coating solids. Stencil coatings are most frequently letters, numbers or decorative designs. NR 422.02(90r)(90r) “Sterilization indicating ink” means an ink that changes color to indicate that sterilization has occurred. NR 422.02(91)(91) “Stripe-kilometer” means one 10-centimeter-wide solid stripe of traffic marking material that is 1.0 kilometer long. NR 422.02(92)(92) “Stripe-mile” means one 4-inch-wide solid stripe of traffic marking material that is 1.0 mile long. NR 422.02(93)(93) “Strippable spray booth coating” means, for the purpose of wood furniture coating, a coating that is applied to a spray booth wall as a protective film to receive overspray during finishing operations and that is subsequently peeled off, thereby reducing or eliminating the need to use organic solvents to clean spray booth walls. NR 422.02(93m)(93m) “Structural glazing” means a process that includes the application of adhesive to bond glass, ceramic, metal, stone, or composite panels to exterior building frames. NR 422.02(94)(94) “Surface coating” means the application of a coating to a product in a coating line. NR 422.02(95)(95) “Surface preparation products” means products used to remove wax, tar, grease and silicone from the surface to prepare the surface for refinishing. NR 422.02(95m)(95m) “Texture coating” means a coating applied to a plastic part that provides an irregular finished surface such as one that is rough or grainy. NR 422.02(95s)(95s) “Thin metal laminating adhesive” means an adhesive intended by the manufacturer for use in bonding multiple layers of metal to metal or metal to plastic in the production of electronic or magnetic components in which the thickness of the bond line is less than 0.25 millimeters. NR 422.02(96)(96) “Thin particleboard” means a manufactured board 0.64 centimeters (¼ inch) or less in thickness made of individual wood particles which have been coated with a binder and formed into flat sheets by pressure. NR 422.02(96m)(96m) “Thinner” means any solvent used to reduce the viscosity or solids content of a coating. NR 422.02(97)(97) “Three or 4 stage coating system” means a topcoat system composed of a pigmented coating, one or 2 semi-transparent midcoats, and a clear coat. NR 422.02(98)(98) “Three-piece can side-seam spray” means a coating sprayed on the exterior and interior of a welded, cemented or soldered seam to protect the exposed metal.