Where:   WQCTotal R.   =   Criteria from NR 105, Table 5 or 6.

  CF   =   Conversion factor for total recover-           able to dissolved.

Conversion factors are as follows:

Arsenic   1.000

Cadmium   0.850

Chromium (III)   0.860

Chromium (VI)   0.962

Copper   0.960

Lead   0.792

Mercury   0.85

Nickel   0.997

Selenium   0.922

Zinc   0.986

NR 105.06(8)(b) (b) The translation of the WQCD into the water quality criterion which accounts for site-specific conditions (WQCTRAN) shall be performed as follows:

WQCTRAN = (Translator)(WQCD)

Where:   Translator (unitless) = ((MP)(TSS) + MD)/MD

MP = Particle-bound concentration of the pollutant (ug/g) in receiving water.

MD = Dissolved concentration of the pollutant in receiving water (ug/L).

TSS = Total Suspended Solids (g/L) concentration in receiving water.

NR 105.06(8)(c) (c) The procedures in pars. (a) and (b) may also be used for the conversion of secondary values from total recoverable to dissolved.

- See PDF for table

NR 105.06 Note Note: * - Criterion listed is applicable to the “total recoverable” form except for chlorine which is applicable to the “total residual” form.

- See PDF for table

- See PDF for table

- See PDF for table

- See PDF for table

- See PDF for table

- See PDF for table

NR 105.06 Note Note: This table is reserved for criteria that USEPA has indicated may be available in the near future.