ATCP 93.240(21)(b)1.1. An application in accordance with sub. (2).
ATCP 93.240(21)(b)2.2. An application fee and certification fee in accordance with s. Table 93.240.
ATCP 93.240(21)(b)3.3. Documentation showing formal education relating to soil resistivity, stray current, structure-to-soil potential, component electrical isolation measurements of buried metal piping and tank systems, and corrosion control.
ATCP 93.240(21)(b)4.4. Documentation from a cathodic protection certification entity recognized by the department, showing the applicant has successfully completed a certification examination that corresponds to the cathodic protection specialty addressed in the application.
ATCP 93.240 NoteNote: The department of agriculture, trade and consumer protection will accept the following certifications as demonstrating compliance with subds. 3. and 4. for a cathodic protection tester:
ATCP 93.240 Note- NACE certification as a CP 1 tester.
ATCP 93.240 Note- NACE certification as a CP 2 technician.
ATCP 93.240 Note- NACE certification as a CP 3 cathodic protection technologist.
ATCP 93.240 Note- NACE certification as a senior corrosion technologist.
ATCP 93.240 Note- NACE certification as a corrosion technologist.
ATCP 93.240 Note- NACE certification as a corrosion technician.
ATCP 93.240 Note- STI certification in UST system cathodic protection monitoring.
ATCP 93.240 NoteNote: The department of agriculture, trade and consumer protection will accept the following certifications as demonstrating compliance with subds. 3. and 4. for a corrosion expert:
ATCP 93.240 Note- NACE certification as a corrosion specialist.
ATCP 93.240 Note- NACE certification as a CP 4 cathodic protection specialist.
ATCP 93.240 NoteNote: NACE, formerly known as the National Association of Corrosion Engineers, can be contacted at NACE International, PO Box 218340, Houston, TX 77218. STI can be contacted at Steel Tank Institute, 570 Oakwood Road, Lake Zurich, IL 60047.
ATCP 93.240(21)(c)(c) Responsibilities. A person who conducts cathodic protection tests or who designs or installs cathodic protection systems shall do all of the following:
ATCP 93.240(21)(c)1.1. Conduct all cathodic protection tests in accordance with this chapter and any manufacturer’s instructions.
ATCP 93.240(21)(c)2.2. Employ only those methodologies for which training has been obtained and documented.
ATCP 93.240 NoteNote: Although several different levels of expertise may qualify for the same certification, this section is intended to prohibit performing cathodic protection activities unless the specific expertise for that activity has been attained and documented.
ATCP 93.240(21)(d)(d) Renewal.
ATCP 93.240(21)(d)1.1. A person may renew a certification as a cathodic protection tester or corrosion expert.
ATCP 93.240(21)(d)2.2. A certification for a cathodic protection tester or corrosion expert shall be renewed in accordance with sub. (7).
ATCP 93.240 HistoryHistory: CR 17-092: cr. Register October 2019 No. 766, eff. 11-1-19; correction in (5) (a), (6) (a), (7) (b) 1., 2. b., c., (9) (d) 3. a., b., (11) (a) 10., (13) (a), (g) 2., (14) (a) 1., (15) (a) 1., (16) (a) 1., (f) 2., (17) (a) 1., 3., (e) 5., (f) 2., (18) (e) 13., (19) (a) 1., 2., (20) (a) 1., (21) (a) 1., 2., (b) 4. made under s. 35.17, Stats., (7) (b) 2. ag., ar. renum. from (7) (b) 2., a. under s. 13.92 (4) (b) 1., Stats., and correction in (13) (e), (15) (d), (17) (a) 3. made under s. 13.92 (4) (b) 7., Stats., Register October 2019 No. 766.
ATCP 93.250ATCP 93.250Tank construction and marking.
ATCP 93.250(1)(1)Multi-compartment tanks. Each compartment of a multi-compartment tank shall be considered a separate tank, even if the same substance is stored in 2 or more of the compartments.
ATCP 93.250(2)(2)Construction. Tanks containing flammable or combustible liquids shall be constructed and listed or labeled to one of the recognized design standards in NFPA 30 section 21.4.2, or to another standard or design approved by the department, except this requirement does not apply to any of the following tanks:
ATCP 93.250(2)(a)(a) Tanks that contain liquids which are also hazardous substances.
ATCP 93.250 NoteNote: Section ATCP 93.350 requires hazardous substance tanks to be designed and constructed under the supervision of a qualified engineer.