Register August 2022 No. 800
Chapter NR 538
BENEFICIAL USE OF INDUSTRIAL BYPRODUCTS
NR 538.04 Performance standards.
NR 538.05 Solid waste rules exemption.
NR 538.06 Industrial byproduct characterization.
NR 538.08 Determination of eligible uses.
NR 538.09 Case-specific approvals.
NR 538.10 Eligible beneficial uses.
NR 538.12 Additional criteria for the beneficial use of industrial byproducts as geotechnical fill.
NR 538.16 Storage and transportation requirements.
NR 538.18 Public participation.
NR 538.20 Environmental monitoring.
NR 538.22 Property owner notification.
NR 538.24 Excavation of existing geotechnical fill.
NR 538.01
NR 538.01 Purpose. The purpose of this chapter is to allow and encourage, to the maximum extent possible, the beneficial use of industrial byproducts in a nuisance-free manner that is protective of public health and the environment and in accordance with good engineering practices. The department encourages the beneficial use of industrial byproducts to preserve resources, conserve energy, and reduce or eliminate the need to dispose of industrial byproducts in landfills. This chapter is adopted under ss.
289.05,
289.06,
289.43 (4),
(7) and
(8), and
227.11, Stats.
NR 538.01 History
History: Cr.
Register, December, 1997, No. 504, eff. 1-1-98;
CR 19-080: am.
Register May 2020 No. 773, eff. 11-1-20.
NR 538.02(1)(1)
Except as otherwise provided, this chapter governs the beneficial use of industrial byproducts, except hazardous waste as defined in s.
291.01 (7), Stats., and regulated under chs.
NR 660 to
679; metallic mining operations for nonferrous minerals as defined in s.
293.01 (9), Stats., and regulated under ch.
NR 182; and metallic mining operations for ferrous minerals as defined in s.
295.41 (26), Stats., including mining wastes and mining waste sites as defined in s.
295.41 (30) and
(31), Stats., and regulated under subch.
III of ch. 295, Stats.
NR 538.02(2)
(2) This chapter does not apply to the design, construction or operation of industrial wastewater facilities, sewerage systems and waterworks treating liquid wastes approved under s.
281.41, Stats., or permitted under ch.
283, Stats., nor to facilities used solely for the disposal of liquid municipal or industrial wastes which have been approved under s.
281.41, Stats., or permitted under ch.
283, Stats., except facilities used for the disposal of solid waste.
NR 538.02 Note
Note: The landspreading of wastewater treatment sludges is regulated under chs.
NR 206 and
214. The landspreading of solid wastes is regulated under ch.
NR 518. Additional state and local laws and codes may apply to the beneficial use of industrial byproducts regulated under this chapter.
NR 538.02 History
History: Cr.
Register, December, 1997, No. 504, eff. 1-1-98;
CR 13-057: am. (1)
Register July 2015 No. 715, eff. 8-1-15.
NR 538.03
NR 538.03 Definitions. In this chapter, the following definitions as well as the definitions in ch.
289, Stats., and s.
NR 500.03 are applicable:
NR 538.03(1)
(1) “
Base aggregates" means specified or selected material of designated thickness placed on a subgrade to support a pavement or other structure.
NR 538.03(2)
(2) “
Beneficial use” means the utilization of an industrial byproduct in a productive manner.
NR 538.03(3)
(3) “
Encapsulated use” means a use in which the measurable leaching, emissions or decomposition characteristics of the industrial byproduct are substantially eliminated by binding them into a solid matrix.
NR 538.03(4)
(4) “
Excess quantities” means the use of industrial byproducts in volumes that are greater than necessary for the specific project purpose.
NR 538.03(5)
(5) ”
Flue gas desulfurization material" or “FGD” means the material recovered from air pollution control systems that capture sulfur dioxide emissions from energy recovery facilities. “Flue gas desulfurization material” includes flue gas desulfurization gypsum produced as a byproduct of a lime or limestone-based reagent wet air pollution control scrubbing process that includes a forced oxidation system resulting in commercial grade calcium sulfate compound. “Flue gas desulfurization material” also includes flue gas desulfurization byproduct material generated in a dry or semi-dry air quality control system, provided the system includes separate coal combustion fly ash capture by means of an electrostatic precipitator or baghouse filter.
NR 538.03(6)
(6) “
Foundry sand” means spent silica-based molding and core sand resulting from metal casting processes, including dry baghouse and wet collector sand fines collected at the foundry during the metal casting process.
NR 538.03(6m)
(6m) “Generator” means any person whose act or process produces an industrial byproduct as identified, listed, or determined by the department under sub.
(8).
NR 538.03(7)
(7) “
Impervious surface” means a barrier layer designed to prevent percolation or contain liquids that have come into contact with the byproduct consisting of either a minimum 3 inches thick of asphalt or concrete, a minimum 2 foot thick clay layer constructed in accordance with s.
NR 504.06 (2) (a) and
(f), a geomembrane layer constructed in accordance with s.
NR 504.07 (5), or other impervious surface designs approved in writing by the department.
NR 538.03(8)(a)
(a) “Industrial byproduct" means, subject to par.
(b), papermill sludge; combustion ash including coal combustion residuals such as fly ash, bottom ash, boiler slag, and material captured in flue gas desulfurization systems; ferrous, steel and aluminum foundry sand; aluminum slag; byproducts from the production of lime including lime kiln dust; or non-hazardous solid waste with similar characteristics as determined by the department.
NR 538.03(8)(b)
(b) “Industrial byproduct” includes only materials that have been generated as a byproduct of an industrial process and possess consistent physical and chemical properties.
NR 538.03(8)(c)
(c) “Industrial byproduct” does not include any of the following:
NR 538.03(8)(c)1.
1. Post-consumer waste or the byproducts of combusting or processing post-consumer waste.
NR 538.03(8)(c)3.
3. Slag generated by the production or processing of iron or steel that is managed as an item of value in a controlled manner and not discarded.
NR 538.03 Note
Note: Materials excluded from the definition of industrial byproducts may be beneficially reused if approved in writing by the department under s.
NR 500.08 (5) (a) and s.
289.43, Stats., except iron or steel foundry slag which is exempted under ss.
289.01(33) and
287.29, Stats.
NR 538.03(9)
(9) “
Lime kiln dust" means the material recovered from air pollution control systems that capture emissions from lime kilns.
NR 538.03(10)
(10) “Productive manner” means the use of an industrial byproduct that meets all of the following criteria:
NR 538.03(10)(b)
(b) Substitutes for the use of a virgin material that must be otherwise obtained.
NR 538.03(10)(c)
(c) Meets relevant product specifications, regulatory standards or design standards when available, and, when such standards are not available, is not used in excess quantities.
NR 538.03(11)
(11) “Representative sample” means any sample of industrial byproduct material collected for analysis that reliably exhibits the average properties of the byproduct production stream.
NR 538.03(12)
(12) “Residential area" means properties that are in an area zoned as residential, are in an area planned for residential zoning under a master plan approved or adopted by a local municipal authority, or in an area within 100 feet of a human residence.
NR 538.03(12m)
(12m) “Select foundry sand” means foundry sand, as defined under sub.
(6), that is comprised of either spent green molding sand, resin bonded molding sand, or core sand with primary components consisting of combinations of silica sand, bentonite clay, and carbonaceous additives such as bituminous coal, gilsonite, and cellulose. “Select foundry sand” may include nominal quantities of spent molding aides such as riser sleeves and ceramic filters but may not include uncured chemically bonded sands or debris beyond trace quantities. “Select foundry sand” must also have been determined to contain less than the concentration specified for the parameters listed in ch.
NR 538 Appendix, Table 1, Column B to meet this definition.
NR 538.03(13)
(13) “Soil or plant additive” means a substance, intended for application to seeds, soil, or plants, that is designed for use or claimed to have value in promoting or sustaining plant growth, improving crop yield or quality, promoting or sustaining the fertility of the soil, or favorably modifying the structural, physical, or biological properties of the soil for agronomic or horticultural purposes and used in accordance with subch.
III of ch. ATCP 40 or ch.
ATCP 41.
NR 538.03(14)
(14) “Subgrade" means the uppermost soil bearing surface upon which base aggregates are placed.
NR 538.03(15)
(15) “Subgrade fill" means the layer or layers of industrial byproduct material placed to achieve a subgrade.
NR 538.03 History
History: Cr.
Register, December, 1997, No. 504, eff. 1-1-98;
CR 05-020: renum. (2) to (6) to be (4) and (6) to (9) and am. (4) and (6), cr. (2), (3), (5) and (10)
Register January 2006 No. 601, eff. 2-1-06;
CR 19-080: r. and recr.
Register May 2020 No. 773, eff. 11-1-20; correction in (12m) made under s.
35.17, Stats.,
Register May 2020 No. 773.
NR 538.04
NR 538.04 Performance standards. No person may store, handle or beneficially use an industrial byproduct in a manner that may cause any of the following:
