This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 499.04(2) (2)Operational requirements. Any person who owns a solid waste treatment facility shall meet the following requirements:
NR 499.04(2)(a) (a) There shall be one or more certified operators on the site of a solid waste treatment facility at all times during the facility's hours of operation, determined as follows:
NR 499.04(2)(a)1. 1. The hours of operation do not include the burndown cycle for facilities that do not have air pollution control devices.
NR 499.04(2)(a)2. 2. The hours of operation include the burndown cycle for facilities that have air pollution control devices.
NR 499.04(2)(b) (b) Each solid waste treatment facility shall employ at least one certified operator. The level of operator certification required shall be as follows:
NR 499.04(2)(b)1. 1. Any facility that does not have an air pollution control device shall employ at least one shift operator.
NR 499.04(2)(b)2. 2. Any facility that has an air pollution control device shall employ at least one chief facility operator or interim chief facility operator.
NR 499.04(2)(c) (c) The owner shall notify the department in writing of the appointment of an interim chief facility operator within 10 business days of the appointment. This appointment is valid for 6 months and may be renewed. Any request for renewing an interim chief facility operator appointment shall be in writing and filed with the department at least 30 days prior to expiration of the 6 month period. The department may deny a request for renewal if the department determines that inadequate attempts have been made to hire a permanent chief facility operator.
NR 499.04 Note Note: All submissions under this chapter shall be mailed to the:
  Department of Natural Resources
  Bureau of Integrated Science Services, Operator Certification
  PO Box 7921
  Madison WI 53707-7921
All application forms required under this chapter may be obtained from this address.
NR 499.04(2)(d) (d) All certificates issued by the department under this chapter shall be displayed on the premises of the facility where the certified operators are employed.
NR 499.04 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93; am. (2) (b) 1., (c), Register, January, 1997, No. 493, eff. 2-1-97.
NR 499.05 NR 499.05 Identification of persons or positions involved in the operation of a solid waste treatment facility. Any person who operates a solid waste treatment facility that burns solid waste and is not exempt under s. NR 499.03 shall obtain certification at the appropriate level in s. NR 499.06.
NR 499.05 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93.
NR 499.06 NR 499.06 Certification levels. There are 2 different certification levels established under this chapter, namely chief facility operator and shift operator. The duties and responsibilities of these persons or positions for the purpose of determining the level of certification required for these persons are as follows:
NR 499.06(1) (1) A chief facility operator's duties and responsibilities include, but are not limited to, the following:
NR 499.06(1)(a) (a) Overall operation and maintenance of the facility.
NR 499.06(1)(b) (b) Ensuring the facility is operated in accordance with established facility policies and procedures.
NR 499.06(1)(c) (c) Ensuring that shift operators are trained and certified as required under this chapter, and are familiar with applicable federal, state and local environmental regulations.
NR 499.06(1)(d) (d) Operating the facility in compliance with applicable federal, state and local laws.
NR 499.06(1)(e) (e) Developing and periodically updating policies and procedures for proper and safe facility operations, including, but not limited to, developing and updating any malfunction prevention and abatement plan required under s. NR 439.11.
NR 499.06(2) (2) A shift operator's duties and responsibilities include, but are not limited to, all of the following:
NR 499.06(2)(a) (a) Supervising and monitoring performance of the solid waste treatment facility during an assigned shift.
NR 499.06(2)(b) (b) Keeping records of facility operations, including operational changes and abnormalities.
NR 499.06(2)(c) (c) Operating the facility in compliance with applicable federal, state and local laws during an assigned shift.
NR 499.06(2)(d) (d) Correcting process upsets and malfunctions.
NR 499.06(2)(e) (e) Communicating the operational status of the facility with the relieving shift operator at shift turnover.
NR 499.06(2)(f) (f) Ensuring safe operation.
NR 499.06(2)(g) (g) For facilities without pollution control devices that do not require a chief facility operator, performing the duties and responsibilities in sub. (1).
NR 499.06 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93 ; am. (2) (intro.), (e) and (g), Register, December, 1995, No. 480, eff. 1-1-96; am. (intro.), (1) (c), r. (3), Register, January, 1997, No. 493, eff. 2-1-97.
NR 499.07 NR 499.07 Solid waste treatment facility operator initial training program requirements.
NR 499.07(1) (1) Applicability. This section applies to any person who submits a training program, other than refresher training, for solid waste treatment facility operators to the department for approval.
NR 499.07(2) (2)Training program requirements. Training programs shall meet the requirements of this section and be approved by the department under s. NR 499.08. Training programs shall include, at a minimum, 24 hours of instruction for shift operators and an additional 8 hours of instruction for chief facility operators.
NR 499.07(2)(a) (a) Training programs for shift operators shall include, at a minimum, instruction on the following subjects:
NR 499.07(2)(a)1. 1. Environmental concerns including, but not limited to, air contaminants emitted from facilities, pathogen destruction and ash handling requirements.
NR 499.07(2)(a)2. 2. Applicable federal, state and local environmental regulations, including performance standards in 40 CFR 60.50 to 60.59a, and requirements in permits and licenses issued under ss. 283.31, 285.60 and 289.31, Stats.
NR 499.07(2)(a)3. 3. Facility design and waste combustion theory and principles.
NR 499.07(2)(a)4. 4. Different types of solid waste treatment facilities and equipment that burn waste.
NR 499.07(2)(a)5. 5. Identification of waste types acceptable for treatment.
NR 499.07(2)(a)6. 6. Proper waste handling procedures.
NR 499.07(2)(a)7. 7. Proper facility startup, operation, shutdown and maintenance procedures.
NR 499.07(2)(a)8. 8. Ash handling procedures.
NR 499.07(2)(a)9. 9. Work safety procedures.
NR 499.07(2)(a)10. 10. Monitoring and automatic control systems.
NR 499.07(2)(a)11. 11. Recordkeeping procedures.
NR 499.07(2)(a)12. 12. An introduction to air pollution control equipment.
NR 499.07(2)(a)13. 13. Malfunction prevention and abatement procedures.
NR 499.07(2)(b) (b) In addition to covering the subjects in par. (a), training programs for chief facility operators shall include instruction on the following subjects:
NR 499.07(2)(b)1. 1. Air pollution control systems, including, but not limited to, wet scrubbers, dry scrubbers, fabric filters and electrostatic precipitators, and the design and function of these systems with regard to air pollution, solid waste and wastewater discharges.
NR 499.07(2)(b)2. 2. Solid waste input issues, including the prohibitions in s. 287.07, Stats.
NR 499.07(2)(b)3. 3. Risk management.
NR 499.07(3) (3)Reporting. Within 30 days of the end of an approved training program the department shall be notified of all those who completed the approved training program.
NR 499.07 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93 ; am. (2) (intro.), renum. (2) (a) to (m) to be (2) (a) 1. to 13., (2) (n) (intro.) to be (2) (b) (intro.) and am., Register, December, 1995, No. 480, eff. 1-1-96; r. (3), renum. (4) to be (3), Register, January, 1997, No. 493, eff. 2-1-97.
NR 499.08 NR 499.08 Review and approval of training programs.
NR 499.08(1)(1) Applicability. This section applies to any owner of a solid waste treatment facility and to any independent sponsor who submits a training program to the department for approval under this chapter.
NR 499.08(2) (2)Department approval. The department shall approve a training program application if the application contains the following:
NR 499.08(2)(a) (a) An application form.
NR 499.08(2)(b) (b) A training manual that addresses, at a minimum, the subjects specified in s. NR 499.07 (2).
NR 499.08(2)(c) (c) A list of persons conducting the training and their qualifications.
NR 499.08(2)(d) (d) A procedure for reporting as specified in s. NR 499.07 (3).
NR 499.08(2)(e) (e) The fee specified under s. NR 499.11 (1) (b).
NR 499.08(3) (3)Approval renewal. Training program approvals shall be valid for 2 years. An approved training program shall be updated when environmental regulations that apply to solid waste treatment facilities affected by this chapter change. In order to renew training program approval, an application containing the items listed in sub. (2) (b), (c) and (d) shall be submitted to the department 30 days prior to expiration of the training program approval. The department may approve or deny the application for renewal based on whether the application adequately updates the training program.
NR 499.08(4) (4)Disapproval. The department shall disapprove any training program that fails to meet any requirements in ss. NR 499.07, 499.11 and this section.
NR 499.08 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93; r. (2) (c), renum. (2) (d) to (f) to be (2) (c) to (d), Register, January, 1997, No. 493, eff. 2-1-97.
NR 499.09 NR 499.09 Solid waste treatment facility operator examination and certification.
NR 499.09(1) (1) Examination application.
NR 499.09(1)(a)(a) Any person who wishes to become a certified operator shall take and pass an examination administered by the department under this chapter. Any person applying to the department to take the examination for chief facility operator or shift operator in order to become a certified operator shall:
NR 499.09(1)(a)1. 1. Complete an approved training program.
NR 499.09(1)(a)2. 2. File an application with, and pay the fee in s. NR 499.11 (1) (a) to the department at least 30 days prior to the date of the written examination.
NR 499.09(1)(b) (b) The department shall notify any person applying under par. (a) of their acceptance or rejection for an examination.
NR 499.09(2) (2)Examination procedures. The department shall conduct written examinations for the purposes of certifying chief facility operators and shift operators according to the following procedures:
NR 499.09(2)(a) (a) Written examinations shall be administered at the conclusion of approved training programs or at other times set by the department.
NR 499.09(2)(b) (b) Written examinations may not be given to persons who did not apply at least 30 days prior to the examination date, who fail to identify themselves on request, who fail to pay the required fees, or who fail to complete an approved training program within one year prior to the examination date.
NR 499.09(2)(c) (c) Examination papers may not be returned to an applicant nor may an applicant review the examination results. Examination papers may be destroyed 60 days after notification of examination results.
NR 499.09(2)(d) (d) Applicants who fail to pass the written examination may apply to the department for reexamination at a subsequent scheduled examination in accordance with sub. (1).
NR 499.09(2)(e) (e) A score of 75% or higher shall be a passing score on the chief facility operator or shift operator examination.
NR 499.09(3) (3)Certification. Upon satisfactory completion of the chief facility operator or shift operator examination, the department shall issue a certificate to an applicant indicating the level of certification for which the applicant has qualified. Certification is valid for one year from the date of issuance and may be renewed according to s. NR 499.10.
NR 499.09 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93; am. (1) (a) 1., (2) (a), (b), renum. (3) (a) to be (3), r. (3) (b), Register, January, 1997, No. 493, eff. 2-1-97.
NR 499.10 NR 499.10 Solid waste treatment facility operator refresher training, certification renewal and expiration.
NR 499.10(1)(1) Applicability. This section applies to any chief facility operator or shift operator.
NR 499.10(2) (2)Refresher training.
NR 499.10(2)(a)(a) Any chief facility operator or shift operator shall annually complete a minimum of 4 hours of refresher training in order to renew his or her certification. Refresher training may be provided by the department, facilities or independent sponsors. Refresher training, if not provided by the department, shall be submitted to the department for its approval. The department shall specify in its approval the number of hours of refresher training for which each submittal qualifies. Approval or denial of refresher training shall be based on relevance to the treatment of solid waste.
NR 499.10(2)(b) (b) Any independent sponsor or solid waste treatment facility that provides refresher training shall submit a list of persons who attended the refresher training to the department within 30 days after the refresher training.
NR 499.10(3) (3)Certification renewal. Any person seeking to renew chief facility operator or shift operator certification shall complete the requirement in sub. (2) before the certification expires. A certified operator shall submit an application for certification renewal to the department at least 30 days prior to expiration of certification. The department shall renew the certification if sufficient documentation is provided that the refresher training requirement has been completed.
NR 499.10(4) (4)Expiration. Certifications shall expire one year following issuance unless renewed according to sub. (3). Any chief facility operator or shift operator whose certification has expired may become certified by meeting the requirements of s. NR 499.09.
NR 499.10 History History: Cr. Register, September, 1993, No. 453, eff. 10-1-93.
NR 499.11 NR 499.11 Fees.
NR 499.11(1)(1) Fees for examination and training program approval shall be as follows:
NR 499.11(1)(a) (a) Written examination and application fee. . . . . . . . . $50.00
NR 499.11(1)(b) (b) Approval of training program. . . . . . . . . . . . . . . . . $500.00
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.