NR 400.02(70)
(70) “Fuel oil" means any petroleum-based fuel, including diesel fuel or petroleum derivatives such as oil tar, as defined in ASTM D396-02a, incorporated by reference in s.
NR 484.10 (8), and any recycled or blended petroleum products or petroleum by-products used as a fuel whether in a liquid, solid or gaseous state.
NR 400.02(71)
(71) “Fugitive emission" means an emission from any emission point within a facility other than a flue or stack.
NR 400.02(72)
(72) “Gasoline" means any petroleum distillate or petroleum distillate/alcohol blend having a Reid vapor pressure of 27.6 kilopascals or greater which is used as a fuel for internal combustion engines.
NR 400.02(73)
(73) “Gasoline dispensing facility" means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.
NR 400.02(73m)
(73m) “General permit" means a permit that may be applicable to similar stationary sources and is issued in accordance with s.
285.60 (3), Stats.
NR 400.02(74)
(74) “Graphic arts" means any printing operations described by 2-digit major group 27 in the Standard Industrial Classification Manual, 1987, incorporated by reference in s.
NR 484.05 (1).
NR 400.02(74m)
(74m) “Greenhouse gases" or “GHG" means an air pollutant that is the aggregate of carbon dioxide (CO
2), methane (CH
4), nitrous oxide (N
2O), sulfur hexafluoride (SF
6), hydrofluorocarbons (HFCs), and perfluorocarbons (PFCs).
NR 400.02(75)
(75) “Grinding mill" means a machine used for the wet or dry fine crushing of any nonmetallic mineral. Grinding mills include, but are not limited to, the following types: hammer, roller, rod, pebble and ball, and fluid energy. The grinding mill includes the air conveying system, air separator or air classifier, where such systems are used.
NR 400.02(76)
(76) “Halogenated hazardous air pollutant compound" or “halogenated HAP compound" means methylene chloride (CAS no. 75-09-2), perchloroethylene (CAS no. 127-18-4), trichloroethylene (CAS no. 79-01-6), 1,1,1-trichloroethane (CAS no. 71-55-6), carbon tetrachloride (CAS no. 56-23-5) or chloroform (CAS no. 67-66-3).
NR 400.02(77)
(77) “Halogenated hazardous air pollutant solvent" or “halogenated HAP solvent" means any solvent that contains a halogenated HAP compound or a combination of halogenated HAP compounds, in a total concentration greater than 5% by weight. The concentration of these compounds in the solvent may be determined using Method 18 of Appendix A,
40 CFR part 60, incorporated by reference in s.
NR 484.04 (16), material safety data sheets or engineering calculations.
NR 400.02(78)
(78) “Hazardous air pollutants listed under section 112(b) of the act" means the federally regulated air pollutants included in the list in section 112(b)(1) of the Act (
42 USC 7412(b)(1)) as revised by
40 CFR part 63 Subpart C.
NR 400.02(79)
(79) “Heat input" means the total gross calorific value per unit of time of all fuels being burned, where gross calorific value of a fuel is measured by ASTM Method D240-02, D1826-94 or D5865-04, incorporated by reference in s.
NR 484.10 (4),
(26) and
(55g). Where the test method gives a higher and a lower heating value, heat input is calculated in Btu per hour using the higher heating value of the fuel.
NR 400.02(82)
(82) “Implementation plan" means a plan adopted to implement, maintain and enforce air standards within the state, an air region, or a portion of the state or region.
NR 400.02(83)
(83) “Incinerator" means a combustion apparatus designed for high temperature operation in which solid, semisolid, liquid, or gaseous combustible wastes are ignited and burned to produce solid and gaseous residues containing little or no combustible material.
NR 400.02(84)
(84) “Increase in the net amount of emissions" has the same meaning as the phrase “net emissions increase" which is defined in s.
NR 405.02 (24).
NR 400.02(85)
(85) “Indirect source" means any stationary source which attracts or may attract mobile source activity or on which mobile source activity is conducted, thus resulting in the indirect emissions of any air contaminant, at or on the indirect source itself, attributable to the motor vehicles or the mobile source activity. Such indirect sources include, but are not limited to highways and roads; parking facilities; retail, commercial and industrial facilities; recreation, amusement, sports and entertainment facilities; airports, bus terminals and train stations; office and government buildings; and educational facilities.
NR 400.02(85m)
(85m) “Industrial cleaning operations" means the process of cleaning products, product components, tools, equipment or general work areas during production, repair, maintenance or servicing with solvents or solvent solutions.
NR 400.02(86)
(86) “Industrial sand mine" means any mine, pit or quarry to which the standard industrial classification (SIC) category number 1446 applies. The SIC category for a source is determined by reference to the Standard Industrial Classification Manual, 1987, which is incorporated by reference in s.
NR 484.05 (1).
NR 400.02 Note
Note: For more detailed information on what the department treats as infectious waste, see subch.
II of ch. NR 526.
NR 400.02(89)
(89) “Kraft pulp" means any pulp produced with an alkaline sulfide solution containing sodium hydroxide and sodium sulfide for a cooking liquor.
NR 400.02(90)
(90) “Laboratory" means a facility or portion of a multi-use facility which does not produce a product for regular commercial use or sale and which is used primarily for scientific or technical experimentation or observation of matter for the purpose of research, development, quality assurance, analysis or teaching.
NR 400.02(91)
(91) “Ledge rock quarry" means any open pit to which the standard industrial classification (SIC) category number 1411, 1422, 1423, or 1429 applies where drilling and blasting is required to extract the nonmetallic mineral. The SIC category for a source is determined by reference to the Standard Industrial Classification Manual, 1987, which is incorporated by reference in s.
NR 484.05 (1).
NR 400.02(92)
(92) “Light-duty trucks" means any motor vehicles rated at 3864 kilograms (8500 pounds) gross weight or less which are designed primarily for the purpose of transporting goods and materials, or derivatives of such vehicles.
NR 400.02(93m)
(93m) “Maintenance cleaning" means an activity carried out to keep general work areas, tools, machinery or equipment, excluding application equipment, in clean and good operational condition.
NR 400.02(94)
(94) “Malfunction" means any sudden failure of air pollution control equipment or process equipment or of a process to operate in a normal or usual manner. Failures that are caused entirely or in part by poor maintenance, careless operation or any other preventable upset condition or preventable equipment breakdown are not malfunctions.
NR 400.02(95)
(95) “Maximum theoretical emissions" means the quantity of air contaminants that theoretically could be emitted by a stationary source without control devices based on the design capacity or maximum production capacity of the source. When determining annual maximum theoretical emissions, a source shall be presumed to operate 8,760 hours per year unless its physical design precludes 8,760 hours of operation per year. Where a source's physical design restricts the number of hours it may operate, annual maximum theoretical emissions shall be calculated taking this restriction into account. In determining the maximum theoretical emissions of VOCs for a source, the design capacity or maximum production capacity shall include the use of raw materials, coatings and inks with the highest VOC content used in practice by the source. In determining the maximum theoretical emissions of a hazardous air contaminant for a source, the design capacity or maximum production capacity shall include the use of raw materials, coatings, inks and fuels with the highest hazardous air contaminant content used in practice by the source. Realistic operating conditions shall be taken into account in determining emissions under this subsection.
NR 400.02(96)
(96) “Metropolitan county" means a county which has been designated as either a metropolitan statistical area or a primary metropolitan statistical area by the federal office of management and budget in Metropolitan Areas, 1993, incorporated by reference in s.
NR 484.05 (3).
NR 400.02 Note
Note: The 20 Wisconsin counties which have been so designated are the counties of Brown, Calumet, Chippewa, Dane, Douglas, Eau Claire, Kenosha, La Crosse, Marathon, Milwaukee, Outagamie, Ozaukee, Pierce, Racine, Rock, Sheboygan, St. Croix, Washington, Waukesha and Winnebago.
NR 400.02(97)
(97) “Minor source" means any stationary source which is not a major source.
NR 400.02(98)
(98) “Mobile source" means any motor vehicle, vessel, aircraft or equipment other than a semistationary source which is capable of emitting any air contaminant while moving or idling on the ground or in the water. Mobile sources include automobiles, motorcycles, trucks, buses, snowmobiles, motorboats, steamships, earthmoving equipment, locomotives and aircraft.
NR 400.02(99)
(99) “Modification" means any physical change in, or change in the method of operation of, a stationary source that increases the amount of emissions of an air contaminant or that results in the emission of an air contaminant not previously emitted. A modification does not include any changes identified in s.
NR 406.04 (4).
NR 400.02(102)
(102) “Motor vehicle" or “vehicle" means every self-propelled device, except railroad trains, by which any person or property is or may be transported or drawn upon a highway.
NR 400.02(104)
(104) “Natural gas" means a naturally occurring fluid mixture of hydrocarbons containing little or no sulfur such as methane, ethane or propane, produced in geological formations beneath the earth's surface, and maintaining a gaseous state at standard atmospheric temperature and pressure conditions.
NR 400.02(105)
(105) “New direct or portable source" means a direct or portable source, the construction or modification of which is commenced after April 1, 1972, or the effective date of promulgation of an emission limit which applies.
NR 400.02(107)
(107) “Nitrogen oxides" or “NO
x" means all oxides of nitrogen except nitrous oxide.
NR 400.02(107m)
(107m) “Non-atomized flow" means the use of solvent or solvent solution in the form of a liquid stream without atomization to remove uncured adhesives, uncured inks, uncured coatings or contaminants from an article.
NR 400.02(109)
(109) “Nonmetallic mineral" means any of the following minerals or any mixture of which more than half the weight is any combination of the following minerals:
NR 400.02(109)(a)
(a) Crushed and broken stone, including limestone, dolomite, granite, traprock, sandstone, quartz, quartzite, marl, marble, slate, shale, oil shale and shell.
NR 400.02(109)(c)
(c) Clay including kaolin, fireclay, bentonite, Fuller's earth, Ball clay and common clay.
NR 400.02(109)(f)
(f) Sodium compounds, including sodium carbonate, sodium chloride and sodium sulfate.
NR 400.02(109)(r)
(r) Kyanite, including andalusite, sillimanite, topaz and dumortierite.
NR 400.02(110)
(110) “Nonmetallic mineral processing plant" means any combination of equipment that is used to crush or grind any nonmetallic mineral wherever located, including but not limited to lime plants, power plants, steel mills, asphalt concrete plants and portland cement plants.
NR 400.02(111)
(111) “Opacity" means the degree to which emissions reduce the transmission of light and obscure the view of an object in the background.
NR 400.02 Note
Note: 20% opacity is equal to one unit on the Ringlemann Chart.
NR 400.02(112)
(112) “Open top vapor degreasing" means the batch process of cleaning and removing soils from metal surfaces by condensing hot solvent vapor on the colder metal parts.
NR 400.02(113)
(113) “Operator" means any person who leases, controls, operates or supervises a facility, an air contaminant source, or air pollution control equipment.
NR 400.02(114)
(114) “Organic compound" means a compound of carbon excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides, metallic carbonates and ammonium carbonate.
NR 400.02(115)
(115) “Overall emission reduction efficiency" means the weight per unit time of an air contaminant removed by a control device divided by the weight per unit time of the air contaminant generated by the source, expressed as a percentage.
NR 400.02(116)
(116) “Ozone" means an allotropic form of oxygen found in the atmosphere which is a photochemical oxidant that oxidizes compounds not readily oxidized by oxygen alone; ozone is a secondary pollutant resulting from the conversion of oxygen in the presence of sunlight and such precursors as volatile organic compounds and nitrogen oxides.
NR 400.02(117)
(117) “Ozone season" means the period from May 1 through September 30 of any year.
NR 400.02(118)
(118) “Particulate" or “particulate matter" means any airborne finely divided solid or liquid material with an aerodynamic diameter smaller than 100 micrometers.
NR 400.02(119)
(119) “Particulate matter emissions" means all finely divided solid or liquid material, other than uncombined water, emitted to the ambient air as measured by an applicable reference method or an equivalent or alternative method specified by the department.
NR 400.02(120)
(120) “Parts per million" or “ppm" means parts of a contaminant per million parts of gas by volume.
NR 400.02(121)
(121) “Performance test" means measurements of emissions or other procedures used for the purpose of determining compliance with a standard of performance.
NR 400.02(122)
(122) “Permit" means any air pollution control permit issued by the department under s.
285.60, Stats.
NR 400.02(123)
(123) “Person" means any individual, corporation, company, cooperative, operator, tenant, lessee, syndicate, partnership, co-partnership, firm, association, trust, estate, public or private institution, joint stock company, political subdivision of the state of Wisconsin, state agency, interstate agency, federal agency, or any legal successor, representative, agent or agency of the foregoing.
NR 400.02(123e)
(123e) “PM
2.5" means particulate matter with an aerodynamic diameter less than or equal to a nominal 2.5 micrometers as measured in the ambient air by a reference method based on Appendix L of
40 CFR part 50, incorporated by reference in s.
NR 484.04 (6g), and designated in accordance with
40 CFR part 53, incorporated by reference in s.
NR 484.03 (5), or by an equivalent method.
NR 400.02(123m)
(123m) “PM
2.5 emissions" means PM
2.5 emitted to the ambient air as measured by an applicable reference method or an equivalent or alternative method specified by the department. PM
2.5 emissions include filterable emissions and gaseous emissions from a source or activity that condense to form particulate matter at ambient temperatures.
NR 400.02(123s)
(123s) “PM
10" means particulate matter with an aerodynamic diameter less than or equal to a nominal 10 micrometers as measured in the ambient air by a reference method based on Appendix J of
40 CFR part 50, incorporated by reference in s.
NR 484.04 (5), and designated in accordance with
40 CFR part 53, incorporated by reference in s.
NR 484.03 (5), or by an equivalent method.
NR 400.02(124)
(124) “PM
10 emissions" means finely divided solid or liquid material, with an aerodynamic diameter less than or equal to a nominal 10 micrometers, emitted to the ambient air as measured by an applicable reference method or an equivalent or alternative method specified by the department. PM
10 emissions include filterable emissions and gaseous emissions from a source or activity that condense to form particulate matter at ambient temperatures.
NR 400.02(125)
(125) “Portable plant" means, with reference to any nonmetallic mineral processing plant, any plant that is mounted on any chassis or skids and may be moved by the application of a lifting or pulling force. In addition, there may be no cable, chain, turnbuckle, bolt or other means, except electrical connections, by which any piece of equipment is attached or clamped to any anchor, slab or structure, including bedrock, that would have to be removed prior to the application of a lifting or pulling force for the purpose of transporting the unit.
NR 400.02(126)
(126) “Portable source" means any facility, installation, operation or equipment which may directly result in the emission of any air contaminant only while at a fixed location but is capable of being transported to a different location. A portable source is a type of direct stationary source.
NR 400.02 Note
Note: Examples are a portable asphalt plant, a portable package boiler or a portable air curtain destructor.
NR 400.02(127)
(127) “Potential to emit" means the maximum capacity of a stationary source to emit any air contaminant under its physical and operational design. Any physical or operational limitation on the capacity of a source to emit an air contaminant, including air pollution control equipment and restrictions on hours of operation or on the type or amount of material combusted, stored or processed, shall be treated as part of its design if the limitation is enforceable by the administrator.
NR 400.02(128)
(128) “Process line" means one or more actions or unit operations which must function simultaneously or in sequence in order to manufacture or modify a product.
NR 400.02 Note
Note: For example, a spray booth, conveyor and drying oven are considered a process line.
NR 400.02(129)
(129) “Reasonably available control technology" or “RACT" means that which provides the lowest emission rate that a particular source is capable of achieving by the application of control technology that is reasonably available considering technological and economic feasibility. Such technology may previously have been applied to similar, but not necessarily identical, source categories.
