NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(1) The limitation for O&G is applicable when acid pickling wastewaters are treated with cold rolling wastewaters.
NR 254.097 Note
(2) Within the range of 6.0 to 9.0
NR 254.097 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.10
NR 254.10
Applicability; description of the cold forming subcategory. NR 254.10(1)
(1) This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from cold rolling and cold working pipe and tube operations in which unheated steel is passed through rolls or otherwise processed to reduce its thickness, to produce a smooth surface, or to develop controlled mechanical properties in the steel.
NR 254.10(2)
(2) The limitations and standards set forth in
ss. NR 254.102 to
254.107 for cold worked pipe and tube operations shall be applicable only when cold worked pipe and tube wastewaters are discharged at steel plant sites. No limitations are applicable or allowable when these wastewaters are hauled off-site for disposal or are otherwise not discharged at steel plant sites. The limitations and standards set forth in
ss. NR 254.102 to
254.107 for cold worked pipe and tube operations shall be applicable only to the blowdown of soluble oil or water solutions used in cold worked pipe and tube forming operations. Limitations for other wastewater sources from these operations shall be established on a site specific basis.
NR 254.10 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.101
NR 254.101
Specialized definitions. The following definitions are applicable to the terms used in this subchapter:
NR 254.101(1)
(1) “Cold worked pipe and tube” means cold forming operations which process unheated pipe and tube products using either water or oil solutions for cooling and lubrication.
NR 254.101(2)
(2) “Combination” means cold rolling operations which include recirculation of rolling solutions at one or more mill stands and once through use of rolling solutions at the remaining mill stands.
NR 254.101(3)
(3) “Direct application” means cold rolling operations which include once through use of rolling solutions at mill stands.
NR 254.101(4)
(4) “Multiple stand” means recirculation or direct application cold rolling mills which include more than one stand of work rolls.
NR 254.101(5)
(5) “Recirculation” means cold rolling operations which include recirculation of rolling solutions at all mill stands.
NR 254.101(6)
(6) “Single stand” means recirculation or direct application cold rolling mills which include only one stand of work rolls.
NR 254.101 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.102
NR 254.102
Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in
40 CFR 125.30 to
125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:
-
See PDF for table 
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.102 Note
(2) Within the range of 6.0 to 9.0
NR 254.102 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.103
NR 254.103
Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in
40 CFR 125.30 to
125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT:
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.103 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.103 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.104
NR 254.104
New source performance standards. The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards:
-
See PDF for table NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
NR 254.104 Note
(2) Within the range of 6.0 to 9.0
NR 254.104 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.105
NR 254.105
Pretreatment standards for existing sources. Except as provided in
ss. NR 211.13 and
211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with
ch. NR 211 and achieve the limitations set forth in
s. NR 254.103.
NR 254.105 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.106
NR 254.106
Pretreatment standards for new sources. Except as provided in
s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with
ch. NR 211 and achieve the following PSNS:
-
See PDF for table NR 254.106 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.106 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.106 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table NR 254.106 Note
(1) The limitations for chromium and nickel are applicable in lieu of those for lead and zinc when cold rolling wastewaters are treated with descaling or combination acid pickling wastewaters.
-
See PDF for table
